English 
Spanish 
Portuguese (Brazil) Corporate Office
ProEndoscopy
10084 N.W. 53 Street
Sunrise, Fl 33351
Office: (954) 747-9000
Tech Support: (305) 992-3648
Fax: (954) 747-9922
Endoscopic devices tend to collect a lot of microbes and debris that interfere with the functioning of the devices in addition to spreading diseases. As a result, they need to be cleaned with a great deal of care. It is very important for operators to follow the manufacturer’s instructions when using and cleaning this equipment in order to get it absolutely right. The device should be disassembled and cleaned very thoroughly in order to remove organic matter that inevitably gets attached to it. Care should be taken to avoid using abrasive materials when cleaning this device. It is also necessary to use a good enzymatic cleaner to break down proteins that have accumulated on the device. The devices also need to be sterilized, either with steam or chemicals, depending on the manufacturer’s instructions.
All employees should receive training on how to clean endoscopic devices so that there is no possibility of anything going wrong. They should also be able to assemble the equipment well. The job of cleaning and sterilizing equipment should be given a great deal of importance so that patients undergoing the procedure do not come to any harm.
Like any surgical procedure, this one too requires a high standard of safety and cleanliness. As a result, the equipment should be handled and maintained according in certain specified manners. Cleaning, disinfection and sterilization are absolutely important because this ensures that the patient does not suffer from infection cause by improperly cleaned equipment. The other advantage is that proper cleaning and handling ensures that equipment lasts longer, enabling a business to be very profitable.
Proendoscopy offers service in Florida for the following Endoscopy equipment:
Q. What endoscopy equipment do you service?
A. ProEndoscopy repairs a wide range of endoscopy equipment including: Rigid EndoScopes, Flexible EndoScopes, Endoscopy Light Cables, Endoscopy Light Sources, Endoscopy Video Cameras and Couplers.
Q. Which brands do you repair?
A. ProEndoscopy repairs all brands and types of Endoscopes including: Storz®, Dyonics®, Stryker®, R.Wolf®, Olympus®, Circon ACMI ®, Linvatec®, Solos®, Guidant®, Smith-Nephew™, Comeg®, Zimmer® plus many more less known brands!
ACMI Cystoscopes: Flexible endoscopes Models: ACMI ACN, ACMI ACN-2, Complete 100% Refurbishment
ACMI Urethroscopes: Flexible endoscopes Models: ACMI AUR’s and ACMI DUR’s, All Minor Level Repairs
OLYMPUS Flexible: Olympus ENF’s, Olympus CYF’s, Olympus URF’s, Olympus BF’s, Olympus LF’s, Complete 100% Refurbishment
STORZ Flexible: Karl Storz Flexible 100% Complete Refurbishment with the exception of Storz Model’s 11274AAU & 11278AU (Flex-X).
MACHIDA: Machida Models: ENT-3L, ENT-4L, ENT-30, Complete 100% Refurbishement.
Arthroscopic surgery depends on a few highly sophisticated equipments, starting with the arthroscope. This device can best be described as a thin telescope with an attached light source. It is passed into the joint that needs surgery through the tiny incision. Other equipment used for this surgery include biopsy forceps, trocar sleeves, tissue scissors and cutters, tissue staplers, burs, cleaning brushes, inflow and outflow tube sets, ligation devices and finally, suturing systems.
Arthroscopic surgery is a very commonly requested procedure for people who have joint problems such as pain, swelling or instability. This procedure basically involves looking inside a joint with the help of a device known as an arthroscope. This type of surgery is also called keyhole surgery because it requires a tiny incision in the skin that rarely exceeds 1 cm in length. This sort of operation is very easy to recover from and also has fewer side effects.
Arthroscopic surgery is usually done on knees and shoulders because they are large joints and therefore very easy to operate upon. Knees tend to have cartilage problems whereas shoulders usually have rotator cuff tears. This procedure is also used when the joint space is inflamed because small bits of bone or cartilage that have broken off into it. However, improvements in technology have ensured that this surgery is increasingly done on a wide range of joints such as elbows, hips, ankles and wrists which are usually very difficult to operate on.
We are now on: Facebook, Twitter, and Youtube!
Click Here to watch the video
Arthroscopy is a minimally-invasive diagnostic and treatment procedure used for conditions of a joint. Originally, arthroscopy was a diagnostic tool only, used primarily for planning a standard open surgery. Now, because of the development of new instruments and advanced surgical techniques, many conditions can also be treated with minimal invasive arthroscopic surgery.
Joints most frequently examined via arthroscopy:
The joints most frequently examined using arthroscopy include the following:
- knee
- shoulder
- elbow
- ankle
- hip
- wrist
Usually, There Is Interference With The Image using a Camera Processor. Why?
Your digital camera might malfunction leading to interference with the image. You might notice distortion in the same place on every photo. This might be because of a problem with your lens. Check it for damage because of dust or fungus. Try to clean it with a soft cloth. If you don’t succeed, don’t attempt to open the camera. Get this done by an authorized service person instead. Interference in the image might also be caused by a weak battery. Always carry backups with you if you need to take many shots. Monitor your camera carefully so that you know how long its battery usually lasts.
What Is A Camera Processor? Why Is It Useful?
A camera processor is the central processor chip that a digital camera uses. It is also used in any other electronic device meant for imaging. It is a very important part of the device. A camera processor helps determine image quality. It also helps enhance battery life. The best processors also enable faster JPEG compression. The additional benefit of a good chip is that the imaging device works very fast. If you’re planning to buy a new camera this year then check its processor carefully. You’ll be able to get better performance out of it if it has a good chip.
Just in. Smith & Nephew endoscopy tower system. This system is great for Arthroscopy procedures….Call in if you have any questions….
Flexible endoscopy repairs in Florida:
Flexible endoscopes usually require to be serviced often. Endoscopy Repairs are performed on both fiber optic endoscopes and video endoscopes. Flexible endoscopy repairs are performed by factory-trained technicians for all makes and models. We repair many endoscopy brands including: Olympus® Pentax®, Fujinon®, ACMI®, Stryker®, Richard Wolf®, etc.
